Technical Data Sheet

BRADY B-7546 THERMAL TRANSFER PRINTABLE TAMPER-EVIDENT WHITE POLYESTER LABEL STOCK

TDS No. B-7546
Effective Date: 30-Jan-2007

Description:


GENERAL
Print Technology: Thermal Transfer
Material Type: Polyester
Finish: Gloss White
Adhesive: Tamper Indicating Acrylic

APPLICATIONS
Rating and serial plates that require high performance and evidence of label removal.

RECOMMENDED RIBBONS
Brady series R6000 and R4400 colored (red, blue, and green)

REGULATORY/AGENCY APPROVALS
UL: B-7546 is UL Recognized to UL969 Labeling and Marking Standard when printed with Brady series R6000 ribbon. See UL file MH17154 for specific details. UL information can be accessed online at ul. com. Search in Certifications area.
CSA: B-7546 is CSA Accepted to C22.2 No. 0.15-95 Adhesive Labels Standard when printed with the Brady series R6000 ribbon. B-7546 is approved to Type C (tamper evident). See CSA file 041833 for specific details. CSA information can be accessed online at directories.csa-international.org.

RoHS: Brady B-7546 is RoHS compliant to 2005/618/EC MCV amendment to RoHS Directive 2002/95/EC.



SPECIAL FEATURES
B-7546 is designed to leave a "VOID" footprint when the label is removed. In addition, a "VOID" pattern will appear on the top surface of the label in order to prevent it from being reused. Recommended 24 hour room temperature dwell before removal for full tamper evident performance. The adhesive nature of this product does not allow for repositioning and requires minimal handling in order to prevent prematurely exposed VOID pattern.



Details:


PHYSICAL PROPERTIES
TEST METHODS
AVERAGE RESULTS
Thickness ASTM D 1000
-Substrate
-Adhesive
-Total
 
0.0020 inch (0.051 mm)
0.0008 inch (0.018 mm)
0.0028 inch (0.069 mm)
Adhesion to:
-Stainless Steel

-Aluminum

-Glass

-Smooth ABS

- Textured ABS

- Polypropylene

- Painted enamel

- Powder coated enamel		 ASTM D 1000
30 minute dwell

30 minute dwell

30 minute dwell

30 minute dwell

30 minute dwell

30 minute dwell

30 minute dwell

30 minute dwell
 
41 oz/in (45 N/100 mm)

37 oz/in (40 N/100 mm)

42 oz/in (46 N/100 mm)

39 oz/in (43 N/100 mm)

4 oz/in (4 N/100 mm)

38 oz/in (41 N/100 mm)

38 oz/in (42 N/100 mm)

10 oz/in (11 N/100 mm)
Drop Shear PSTC-7
15 hours*
Tensile Strength and Elongation ASTM D 1000
-Machine Direction
-Cross Direction
 
45 lbs/in (788 N/100 mm), 90%
48 lbs/in (841 N/100 mm), 100%
Application Temperature Lowest application temperature to stainless steel
39°F (4°C)

*minimum value

Tamper evident adhesive performance properties were tested on B-7546 laminated to the indicated surfaces, exposed to the indicated environments and removed from the environments prior tp testing. The label was removed at a 135° angle with a peel rate of 90 in/min and the remaining VOID adhesive pattern on each surface was observed.

SUBJECTIVE OBSERVATION OF ADHESIVE PERFORMANCE
(PERCENTAGE OF VOID PATTERN RETAINED)
SURFACE TYPE
24 hours @ 72°F (22°C)
30 days at 104°F (40°C)
30 days at -40°F (-40°C)
30 days at -94°F (-70°C)
Laminated to:
-Stainless Steel

-Aluminum

-Glass

-Smooth ABS

- Textured ABS

- Polypropylene

- Painted enamel

- Powder coated metal
 
85%-100%

85%-100%

85%-100%

85%-100%

0-10%

85%-100%

85%-100%

25%-40%
 
85%-100%

85%-100%

85%-100%

85%-100%

0-10%

85%-100%

85%-100%

75%-90%
 
85%-100%

85%-100%

85%-100%

85%-100%

0-10%

85%-100%

85%-100%

15%-30%
 
40%-55%

15%-30%

10%-25%

85%-100%

0-15%

0-15%

80%-95%

0-15%
Performance properties tested on B-7546 samples printed using Series R6000 ribbon and a BradyPrinter™ THT Model 300X Thermal Transfer Printer. The labels were printed with alphanumerics and 3:1 ratio with 6 mil minimum X dimension barcode. Printed samples of B-7546 were laminated to aluminum before exposure to the indicated environmental condition.


PERFORMANCE PROPERTIES
TEST METHODS
TYPICAL RESULTS
Long Term High Service Temperature 30 days at 175°F (80°C) No visible effect *
Long Term Low Service Temperature 30 days at -40°F (-40°C) No visible effect
Humidity Resistance 30 days at 100°F (37°C), 95% R.H. No visible effect
UV Light Resistance 30 days in UV Sunlighter™ 100 Slight yellowing of topcoat.
No visible effect to print.
Weatherability ASTM G 26
30 days in Xenon Arc Weatherometer		 Slight yellowing of topcoat.
No visible effect to print.
Some loss of tamper evidence.

The tamper evident VOID pattern of B-7546 was retained after exposure to all of the listed conditions except for weatherometer.

* Laboratory testing has shown that the tamper-evidency VOID pattern of this product may become nonfunctional after exposure to temperatures higher than 80°C.


PERFORMANCE PROPERTY
CHEMICAL RESISTANCE

Samples printed with a BradyPrinter™ THT Model 300X using Brady Series R6000 ribbon and then laminated to aluminum panels. Test was conducted at room temperature after 24 hour dwell. Testing consisted of 5 cycles of 10 minute immersions in the specified chemical reagent followed by 30 minute recovery periods. After final immersion, samples rubbed 10 times with cotton swab saturated with test fluid.


CHEMICAL REAGENT
SUBJECTIVE OBSERVATION OF VISUAL CHANGE
LABEL STOCK
SUBSTRATE/
ADHESIVE
R6000 PRINTING
EFFECTS OF
IMMERSION
R6000 PRINTING
COTTON SWAB RUBS
Methyl Ethyl Ketone Moderate adhesive ooze Moderate Fade/Smear/Bleed Ink removed
1,1,1-Trichloroethane Slight Adhesive ooze No visible effect Ink removed
Toluene Slight Adhesive ooze No visible effect Ink removed
Isopropyl Alcohol No visible effect No visible effect No visible effect
Mineral Spirits No visible effect No visible effect No visible effect
JP-8 Jet Fuel No visible effect No visible effect No visible effect
Gasoline No visible effect No visible effect No visible effect
SAE 20 WT Oil No visible effect No visible effect No visibl e effect
Mil 5606 Oil No visible effect No visible effect No visible effect
Rust Veto® 342 No visible effect No visible effect No visible effect
Skydrol® 500B-4 No visible effect No visible effect Ink removed
Super Agitene® No visible effect No visible effect No visible effect
Deionized Water No visible effect No visible effect No visible effect
3% Alconox® Detergent No visible effect No visible effect No visible effect
10% Sodium Hydroxide Solution No visible effect No visible effect No visible effect
10% Sulfuric Acid Solution No visible effect No visible effect No visible effect

Product testing, customer feedback, and history of similar products, support a customerperformance expectation of at leasttwo years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80 degrees F and 60% RH . We are confident that our product will perform well beyond this time frame. However, it remains the responsibility of the user to assess the risk of using such product. We encourage customers to develop functional testing protocols that will qualify a product's fitness for use, in their actual applications.




Trademarks:
Alconox® is a registered trademark of Alconox Co.
BradyPrinter™ is a trademark of Brady Worldwide, Inc.
Rust Veto® is a registered trademark of the E.F. Houghton & Co.
Skydrol® is a registered trademark of the Monsanto Company
Sunlighter™ is a trademark of the Test Lab Apparatus Company
Super Agitene® is a registered trademark of Graymills Corporation
ASTM: American Society for Testing and Materials (U.S.A.)
PSTC: Pressure Sensitive Tape Council (U.S.A.)
SAE: Society of Automotive Engineers (U.S.A.)
All S.I. Units (metric) are mathematically derived from the U.S. Conventional
Units.

Note: All values shown are averages and should not be used for specification purposes.
Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.

Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information.


WARRANTY
Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under no circumstances will Brady be liable for any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady's products.

Copyright 2007 Brady Worldwide, Inc. | All Rights Reserved
Material may not be reproduced or distributed in any form without written permission.

Brady North America | 6555 W. Good Hope Rd | Milwaukee, WI 53223 | USA | Tel: 414-358-6600 | Fax: 800-292-2289