Materials Die-Cut Parts Clean Labels Nameplates Heat Sink Bonding Thermal Management More...
	Consumer Electronics Mobile Handset Hard Disk Drives Medical Packaging More...
	Flatbed Die-Cutting Rotary Die-Cutting Laser Die-Cutting Material Converting Tolerances Assembly Solutions More...

home > capabilities > tolerances Tolerances Description Brady Die-Cut's state-of-the-art tooling process and equipment allows us to meet the stringent tolerance requirements neccessary in industries guided by precision. Actual tolerances vary based on web complexity and the materials used. Rotary Die-Cutting ± 0.1mm (.004") to ± 0.3 mm (.012") tolerances Crossweb holds tighter than down web Avoid lines cut closer than 1.575 mm (.062") to each other Smallest hole: 1.270 mm (.050") Hole from edge of part: 1.651 mm (.065") Smallest slot: 1.524 mm (.060"), prefer 2.032 mm (.080") Typical minimum radius corner: 0.406 mm (.016") Foams and thicker materials dictate greater ' tolerances Male/Female Die-Cutting ± 0.05 mm (.002") to ± 0.2 mm (.008") tolerances Avoid lines cut closer than 0.5 mm (.020") to each other Smallest hole: 0.5 mm (.020") Hole from edge of part: 0.5 mm (.020") Typical minimum radius corner: 0.2 mm (.008") (Conversion: 1 inch = 25.4mm)

>>Legal/Disclaimers >>ISO 9001/QS 9000/TS16949/ISO13485 Certifications >>Your opinion is important. Take our survey here. Copyright 2006 Brady Worldwide Inc. All Rights Reserved.